Water supply operator. Job description of a pumping station operator Job description of a water pumping station operator

Job responsibilities Service pumping units, equipped with piston and centrifugal pumps with a total capacity of over 1000 to 3000 m3/h of water, pulp and other non-viscous liquids, and pumping units for pumping oil, fuel oil, tar, etc. with a total pump capacity of over 100 to 500 m3/h. Maintenance of pumps and pumping units in the field, on construction sites and at industrial water intakes with a capacity of each pump or unit of over 100 to 1000 m3/h of water and wellpoint units with a pump capacity of over 100 to 600 m3/h each. Maintenance of vacuum pump installations for degassing coal mines with a total pump capacity of over 6000 to 18000 m3/h of methane-air mixture. Starting and stopping motors and pumps. Maintaining the specified pressure of the pumped liquids (gas), monitoring the uninterrupted operation of pumps, engines and fittings of the serviced pipeline section. Maintenance of power and lighting electrical installations up to 1000 V. Performing simple electrical work at a substation. Load regulation of the electrical equipment of the site (substation). Identification and elimination of deficiencies in the operation of serviced equipment of installations, including power and lighting electrical networks, electrical circuits of process equipment. Maintaining technical records and reporting on the operation of pumping equipment. Performance current repairs pumping equipment and participation in medium and major repairs his.

Must know: design and purpose of pumping equipment; installation of piston and centrifugal pumps for pumping liquids (gas); rules for operation and repair of serviced equipment; diagrams of air ducts, suction and discharge pipelines and control devices; design of clinkers and filters; fundamentals of electrical engineering, electrical engineering, hydraulics and mechanics; ways to troubleshoot equipment and eliminate accidents; purpose and application of control measuring instruments; rules and regulations of labor protection, safety precautions (when servicing electrical installations in the scope of qualification group II) and fire protection.

JOB DESCRIPTION FOR 4TH GRADE PUMPING UNIT MACHINER

I. General provisions

A pumping unit operator of the 4th category is directly subordinate to __________________.

A pumping unit operator of the 4th category follows the instructions of __________________.

A pumping unit operator of the 4th category replaces __________________.

A pumping unit operator of the 4th category is replaced by __________________.

Must know:
- device and design features centrifugal, piston pumps, vacuum pumps and pipe pumps of various systems;
- design and location of outer chambers, pipelines, grids, wells and instrumentation;
- electrical engineering, hydraulics and mechanics;
- arrangement of serviced electric motors, direct and alternating current generators, transformers, equipment distribution devices, electrical networks and electrical appliances;
- rules for starting and stopping all equipment of pumping units;
- methods for troubleshooting equipment operation and eliminating accidents;
- rules and regulations of labor protection, safety precautions (when servicing electrical installations in the scope of qualification group III) and fire protection.

_________________________________________________________________.

II.

Job responsibilities Maintenance of pumping stations (substations, installations) equipped with pumps and pipe pumps various systems

with a total capacity of over 3,000 to 10,000 cubic meters. m/h of water, pulp and other non-viscous liquids.

Starting, regulating the operating mode and stopping motors and pumps.

Maintenance of pumps and pumping units in the field and on construction sites with a pump capacity of over 1000 to 3000 cubic meters. m/h of water each and wellpoint and vacuum pumping units with a pump capacity of over 600 cubic meters. m/h each.

Maintenance of pumps and pumping units in coal mines with a total pump capacity of over 18,000 cubic meters. m/h of methane-air mixture.

Monitoring the provision of a given pressure of liquid, gas and pulp in the network of the serviced area.

Maintenance of transformer substations under the guidance of a more highly qualified driver.

Identification and troubleshooting of pumping equipment, including electric motors and electrical circuits of process equipment.

Maintenance of power and lighting electrical installations over 1000 V.

Performing electrical work of medium complexity.

Load regulation of the electrical equipment of the site (substation).

_________________________________________________________________.

Preparation of defect reports for repairs.

III.

give his subordinate employees instructions and tasks on a range of issues included in his functional responsibilities.

control the implementation of production tasks, timely execution of individual assignments by employees subordinate to him.

request and receive necessary materials and documents related to his activities and the activities of his subordinate employees.

interact with other services of the enterprise on production and other issues included in his functional responsibilities.

get acquainted with draft decisions of the enterprise management concerning the activities of the Division.

propose to the manager proposals for improving work related to the responsibilities provided for in this Job Description.

submit for consideration by the manager proposals on rewarding distinguished employees and imposing penalties on violators of production and labor discipline.

report to the manager about all identified violations and shortcomings in connection with the work performed.

_________________________________________________________________.

IV.

Responsibility

A pumping unit operator of the 4th category is responsible for: For failure to perform (improper performance) of one’s official duties as provided for in this job description, within the limits determined by the current labor legislation

Ukraine.

For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine. For causing material damage

_________________________________________________________________.

- within the limits determined by the current labor, criminal and civil legislation of Ukraine. The operator of pumping stations must know and strictly comply with labor safety requirements, fire safety , industrial sanitation. 1.7. The operator of pumping stations must be able to use primary fire extinguishing means, know their location and monitor their serviceability. On It is necessary to place fire extinguishers and a box of dry sand. In the premises of pumping stations it is necessary to use only serviceable tools made of non-sparking material. 1.8. Storage of lubricants at pumping stations is allowed in the designated place in quantities not exceeding the daily requirement. Lubricants must be stored in special metal or plastic containers with tightly closed lids. It is not allowed to store flammable liquids at the pumping station. 1.9.

General provisions

OCCUPATIONAL SAFETY REQUIREMENTS IN EMERGENCY SITUATIONS 4.1. In the event of an emergency, it is necessary to act in accordance with the emergency response plan. 4.2. In the event of a fire at the pumping station, you should turn off the power, close the valves on the input and output lines of the pumps, call the fire department, report the incident to the management of the enterprise, and take measures to extinguish the fire.

4.3. If any malfunction is detected that disrupts the normal operation of the pump, it must be stopped. Make an entry in the operating log of the pumping units about all noticed deficiencies, and notify the management of the enterprise (or the shift supervisor).
4.4. In the event of a sudden power outage, disconnect the pump motors from the power supply and then close the valves on the suction and pressure pipelines of the pumps. 4.5.

Job description for pumping unit operator of the 4th category

Bandage the burned surface with a sterile bandage and go to a medical facility. Notify the workshop management.4.3. In case of electric shock, first of all, release the victim from the action of electric current (disconnect the equipment from the network).

Attention

If the victim has lost consciousness but is breathing, he must be laid down, the collar unfastened, and fresh air given. If there is no breathing or a pulse cannot be felt, the victim must immediately undergo artificial respiration until a doctor arrives.

5. SAFETY REQUIREMENTS AFTER WORK 5.1. At the end of his duty, the driver is obliged to check the condition of the pumps, electric motors and auxiliary equipment. Record in the shift acceptance log all the work he performed to eliminate defects discovered during operation of the equipment, as well as defects that were not eliminated.5.2.

Pumping unit operator: ETCS requirements

GENERAL SAFETY REQUIREMENTS 1.1. TO independent work Persons who are at least 18 years old, who have passed a medical examination, completed introductory briefing, fire safety briefing, initial workplace training, training in safe labor methods and techniques, and passed an exam are allowed as a pumping station driver.1.2. The employee must undergo: - repeated briefing on labor safety in the workplace (quarterly), - unscheduled briefing: in case of changes in the technological process, replacement or modernization of devices and tools, changes in working conditions and organization, the emergence of new factors affecting labor safety, when violations of labor safety instructions, breaks in work for more than 60 calendar days, 1.3.

Occupational safety instructions for pumping station operators

Bring your workplace okay, change clothes. Workwear and safety shoes should be stored separately from personal clothing. 5.3. Take a warm shower, wash your face and hands thoroughly warm water with soap.

Info

See other articles in the Occupational Safety and Health section. Read and write helpful comments on this article. We recommend downloading from our Free Technical Library: Elektor Electronics magazines 2015 (archive for the year) magazines Home Computer 2007 (archive for the year) book Operation and repair of large vertical electric motors.

Sokolov R.I., 1988 book Radio amateurs - for the rural club. Vasiliev V.A., 1983 article Trolleybus driver.

Instructions for pump station operator

Order of the Ministry of Housing and Communal Services of the RSFSR of May 14, 1984 No. 221 “On the approval and implementation of standard instructions on labor protection” I order: 1. To approve and enter into force from September 1, 1984, agreed with the Central Committee of the trade union of local industrial workers and municipal enterprises Standard instructions on labor protection for drivers of water supply and sewerage pumping stations, chlorination plant operators, mechanics for emergency repair work of sewer networks.
2. To managers of water supply and sewerage enterprises in relation to local conditions, based on approved Standard instructions, develop labor protection instructions for workers in the above professions. 3. The Main Computing Center (Comrade Fursik) to publish in the third quarter.
this year the specified Instructions in a circulation of 350 copies. 4.
At the end of duty: - check the technical condition of the station’s operating equipment and make appropriate entries in the log; — clean the engine room and equipment, as well as the area adjacent to the engine room; — close all hatches and covers that were used during the shift; - inform the shift worker about the condition of the operating equipment in reserve and repair, about the shortcomings and malfunctions noticed during work, about the measures taken to eliminate them and about the orders and instructions of the workshop administration; — hand over a shift at the workplace with all entries in the work log; - in case of absence (lateness) of a shift worker, report this to the workshop administration (shift supervisor), and do not leave duty until the shift arrives. 4.
At the end of duty: - check the technical condition of the station’s operating equipment and make appropriate entries in the log; — clean the engine room and equipment, as well as the area adjacent to the engine room; - inform the shift worker about the condition of the operating equipment in reserve and repair, about the shortcomings and malfunctions noticed during work, about the measures taken to eliminate them and about the orders and instructions of the workshop administration; — hand over a shift at the workplace with all entries in the work log; - in case of absence (lateness) of a shift worker, report this to the workshop administration (shift supervisor), and do not leave duty until the shift arrives. 4.

Instructions for pumping station operator in housing and communal services

In the event of an accident, it is necessary to provide the victim with first aid and, if necessary, call an ambulance medical care, inform your immediate supervisor and keep the situation at the workplace unchanged until the investigation, unless it poses a threat to workers and does not lead to an accident. 5. OCCUPATIONAL SAFETY REQUIREMENTS AFTER WORK 5.1. Hand over duty to the shift driver with an entry in the operation log of the pumping units about all noticed deficiencies, malfunctions, instructions, and orders from management.

It is not allowed to leave the workplace until the shift arrives. If the replacement driver does not arrive, notify management or the shift supervisor.

5.2. Get your workspace in order and change clothes. Workwear and safety shoes should be stored separately from personal clothing. 5.3.
The employee is obliged to: - use the personal protective equipment for its intended purpose and take care of the issued personal protective equipment; - be able to provide first (pre-medical) aid to the victim in an accident; - know the location of the means of providing first aid, primary fire extinguishing means, main and emergency exits, escape routes in case of fire or accident. - perform only assigned work, do not transfer it to others without the permission of the foreman or workshop manager, - keep the workplace clean and tidy, do not clutter it with parts, workpieces , metal waste, garbage, etc. - while working, be attentive, do not get distracted or distract others, do not allow persons unrelated to work into the workplace.1.5. The pumping station operator must know and observe the rules of personal hygiene.

For local lighting or in the absence of electricity, the driver of the pumping station should use a portable battery-powered lamp in an explosion-proof design with a voltage not exceeding 12 V, which is turned on and off outside the pumping station. It is not allowed to use open flame sources for lighting.

1.10. Smoking and eating are permitted only in areas specially designated for this purpose. 2. Labor protection requirements before starting work 2.1. Wear the protective clothing and safety shoes required by the relevant regulations. Overalls must be fastened. 2.2. Read the entries in the operation log of the pumping units. 2.3.

VX-T-2 - instructions for servicing pumping stations of water blocks S-6, S-7, S-8, S-7/2, S-8/2. 3.21. VX-T-3 - instructions for servicing pumping stations S-5, S-7, S-7/2, S-23, S-55, S-58. 3.22. VKh-IOT-5 - instructions for labor protection during the operation of high-voltage electric motors in the water supply workshop. 3.23. VH-PB-1 - instructions on fire safety measures in the water supply workshop. 3.24. Instructions on the interaction of water workshop personnel with PCH-17, PCH-20 during fires. 3.25. VX-T-16 - operating instructions for ventilation systems of the water supply workshop. 3.26. VKh-T-20 - instructions for chlorinating industrial recycled water in a water supply workshop. 3.27. VX-T-31 - instructions for conservation of technological equipment in the water supply workshop. 3.28. Instructions for organizing the safe movement of vehicles and pedestrians on the territory of enterprises and organizations of MNHP. 3.29.

Job description for pumping unit operator of the 5th category

ON-LINE APPLICATION Agreed Approved by Chairman of the trade union committee Head of the organization 2002 2002 Resolution No. Labor safety instructions for water supply operators General requirements safety. Workers at least 18 years of age who have passed a medical examination, training and safety instructions are allowed to work as a water supply operator. Before being assigned to independent work, the operator must complete training and pass a knowledge test in the commission on electrical safety rules with the assignment of first groups on electrical safety. The water supply operator is allowed to work independently by order of the enterprise. The water supply operator undergoes a periodic knowledge test at the enterprise commission once every 12 months. The water supply operator is responsible for; water supply to the enterprise;

Pumping unit operator: ETCS requirements

Instrumentation and automation, rules for starting and stopping pumping units, methods for troubleshooting equipment and eliminating accidents; 5.6. comply with the established mode of conduct technological process according to the technological instructions; 5.7. train newly hired drivers assigned to him in the process of work in safe techniques and work methods; 5.8. monitor the wearing of issued special clothing and safety footwear by subordinate drivers, and their use of the required protective equipment; 5.9. do not allow unauthorized persons into the pumping room; 5.10. comply with the requirements of instructions and rules on labor protection, fire and gas safety, industrial sanitation in the workplace and when performing one-time work; 5.11. attend production and technical courses at least once every three years followed by passing exams; 5.12.

Error 404 page does not exist

Occupational safety management system. 3.30. Regulations on the procedure for monitoring the operation and accounting for failures of instrumentation and automation equipment (instrumentation and automation). 3.31. Rules for intra-facility and access control. 3.32.

Regulations on the procedure for organizing and carrying out work on safe shutdown for a long period and conservation of hazardous industrial facilities. 3.33. Regulations on the system for organizing work on operation, maintenance and testing the serviceability of SBS (interlocking and alarm systems).
3.34. Internal labor regulations for employees. 3.35. Instructions on safety measures when working with methanol at enterprises and organizations of MNHP.
3.36.

Instructions on technical investigation and recording of incidents at JSC. 3.37. Emergency response plan. 3.38. Regulations on the division of functions for metrological support of production between workshops and divisions.

3.39.

Job description for 6th grade pumping unit operator

On the actions of employees in the event of detection of a suspicious object or signs of intrusion.” 3.40. No. 2 - instructions “On the actions of employees in the event of receiving a telephone message containing a threat of a terrorist attack in work time" Persons who have reached the age of 18, have no medical contraindications, have a document on education, qualifications or special knowledge in this profession, have undergone instruction, theoretical and practical training, internship and have passed the exam for admission to independent work are allowed to work as a driver of pumping units. work.

4. RIGHTS The operator of pumping units has the right: 4.1. stop work in emergency cases, if further continuation of work creates a danger to others or threatens the safety of the equipment; 4.2.

Responsibilities of the operator of pumping units at the KNS station

The driver’s workplace is the entire room in which the equipment and communications necessary for obtaining water are located, as well as the adjacent territory, if it is located auxiliary equipment and shut-off and control valves.4. Safety requirements in emergency situations4.1. In the event of a fire in the pumping room, take measures to eliminate it using primary fire extinguishing means, call the fire department, and notify management. In case of burns, it is necessary to clear the affected area of clothing and shoes.
Bandage the burned surface with a sterile bandage and go to a medical facility. Notify the boiler room manager. In case of severe mechanical injuries, place the victim in a safe place, give him a comfortable and calm position and call emergency medical assistance (notify the manager...

Instructions for the operator of a water recycling pumping station

Faulty equipment caused an accident at a paper mill. In the section - Occupational safety news On August 1 of this year, a repairman was seriously injured at the production of the Balakhninsky paper mill of Volga JSC. The incident occurred during scheduled maintenance work on the press section of the papermaking…
Rostechnadzor inspected enterprises that do not produce commercial petroleum products, but carry out export deliveries. In the section - News on labor protection, the Federal Service for Environmental, Technological and Nuclear Supervision (Rostechnadzor) reports that, as part of the execution of the instructions of the Deputy Chairman of the Government Russian Federation Arcadia…

Must know:

arrangement and design of equipment for high-power pumping units equipped with engines, pumps and pipe pumps of various systems;
design and layout of outer chambers, wells, pipelines and filters;
automation and telemechanics of serviced equipment;
methods of testing serviced equipment;
full electrical diagram serviced object (area);
adjustment and repair of control and measuring instruments and automatic control devices;
rules and regulations of labor protection, safety precautions (when servicing electrical installations in the scope of qualification group V) and fire protection.

Responsibilities of a water supply pump operator

Library KvantLibrary of electrical engineeringKnow and be ableMassive radio library BOOKS ON RADIO ENGINEERING AND ELECTRONICS FOR FREE:CarMicrowave equipmentRecording and playback of soundLamp equipmentFor a beginner radio amateurSecurity and safetyRadar, navigationRadio engineering technologiesRadio control, modelingRoboticsCircuits Theoretical electronics, radio engineering AmplifiersDigital signal processingElectronics in everyday lifeElectronics in medicineElectronics in scienceElectronics for musicians FREE REPAIR BOOKS:Audio equipment repairHome appliance repairVideo equipment repairRepair tube televisionsRepair of semiconductor televisionsRepair of monitorsRepair of office equipmentRepair of radiosRepair of telephones and faxesSatellite televisionTheory of televisionTheory of electronics repair BOOKS ON MEASUREMENTS FOR FREE:Measurements and metrologyMeasuring equipmentMeasuring equipment.

Monitoring the uninterrupted operation of drive motor pumps, fittings and pipelines of the serviced area, as well as water pressure in the network.
Inspection, regulation of particularly complex pumping equipment, water pressure devices, control devices, automation and safety devices.
Identification and elimination of the most complex defects in pumping units.
Inspection and load testing of repaired equipment.
Maintenance of power and lighting installations.
Replacement of control and measuring instruments.
Maintenance of electrical equipment with automatic process control.
Checking and troubleshooting electrical equipment.

Water supply pumping unit operator

A pumping unit operator of the 6th category must know: - the structure and design of equipment for high-power pumping units equipped with engines, pumps and pipe pumps of various systems; - design and layout of outer chambers, wells, pipelines and filters; - automation and telemechanics of serviced equipment; - methods of testing the equipment being serviced; - complete electrical diagram of the serviced facility (area); - adjustment and repair of instrumentation and automatic control devices; - rules and regulations of labor protection, safety precautions (when servicing electrical installations in the scope of qualification group V) and fire protection. 2. Job responsibilities The operator of pumping units of the 6th category is assigned the following job responsibilities: 2.1.

JOB DESCRIPTION

PUMPING UNIT MACHINE IN THE WATER SUPPLY SHOP

1. SUBMISSION

1.1. The pumping unit operator reports directly to the shift supervisor. The operator of pumping units of the lowest category is subordinate to the operator of pumping units of the highest category according to the staffing schedule.

2. SERVICE OBJECT

2.1. The service facilities for pumping unit operators include:

Equipment listed in section 2 of technological instructions VX-T-2 and VX-T-3;

Pipelines, shut-off valves, instrumentation and automation, SBS diagrams at a given workplace, electrical equipment.

3. LIST OF INSTRUCTIONS, KNOWLEDGE OF WHICH IS MANDATORY FOR PUMPING UNIT OPERATORS IN THE WATER SUPPLY SHOP

3.1. IOT-1 - instructions on labor protection for workers.

3.2. IOT-GB-1 - instructions for labor protection when organizing and carrying out gas hazardous work.

3.3. IOT-2 - instructions for labor protection during repair, construction and installation work.

3.4. IOT-PB-2 - instructions for labor protection when organizing and conducting hot work.

3.5. IOT-4 - instructions on labor protection during the operation of electrical equipment by process personnel.

3.6. IOT-6 - instructions on labor protection during the operation of water supply and sewerage networks.

3.7. PB-1 - instructions on fire safety measures.

3.8. TB-8 - operating instructions for pressure equipment.

3.9. T-9 - instructions on monitoring compliance with standards and parameters of technological regimes, recording technological violations, recording raw materials, finished products and intra-plant transfers of products.

3.10. TB-11 - instructions for the operation and repair of process pipelines.

3.11. T-12 - instructions for use technical operation buildings and structures.

3.12. TB-14 - instructions for operating steam pipelines, hot water, steam condensate and workshop heating.

3.13. T-15 - instructions for the safe performance of work with lifting machines for slingers and persons using lifting machines controlled from the floor.

3.14. IOT-16 - instructions for the safe operation of steam rooms.

3.15. IOT-17 - instructions for labor protection during operation and repair of ventilation systems.

3.16. T-20 - instructions for assigning an electrical safety group to non-electrical and electrical engineering personnel.

3.17. IOT-22 - instructions on labor protection when performing work at height.

3.18. TB-24 - instructions for use and repair of shut-off valves equipped with an electric drive.

3.19. VKh-IOT-2 - labor protection instructions for the driver of pumping units in the water supply shop.

3.20. VX-T-2 - instructions for servicing pumping stations of water blocks S-6, S-7, S-8, S-7/2, S-8/2.

3.21. VX-T-3 - instructions for servicing pumping stations S-5, S-7, S-7/2, S-23, S-55, S-58.

3.22. VX-IOT-5 - instructions on labor protection during the operation of high-voltage electric motors in the water supply workshop.

3.23. VH-PB-1 - instructions on fire safety measures in the water supply workshop.

3.24. Instructions on the interaction of water workshop personnel with PCH-17, PCH-20 during fires.

3.25. VX-T-16 - operating instructions for ventilation systems of the water supply workshop.

3.26. VX-T-20 - instructions for chlorinating industrial recycled water in a water supply workshop.

3.27. VX-T-31 - instructions for conservation of technological equipment in the water supply workshop.

3.28. Instructions for organizing the safe movement of vehicles and pedestrians on the territory of enterprises and organizations of MNHP.

3.29. Occupational safety management system.

3.30. Regulations on the procedure for monitoring the operation and accounting for failures of instrumentation and automation equipment (instrumentation and automation).

3.31. Rules for intra-facility and access control.

3.32. Regulations on the procedure for organizing and carrying out work on the safe shutdown for a long period and conservation of hazardous industrial facilities.

3.33. Regulations on the system for organizing work on operation, maintenance and testing the serviceability of SBS (interlocking and alarm systems).

3.34. Internal labor regulations for employees.

3.35. Instructions on safety measures when working with methanol at enterprises and organizations of MNHP.

3.36. Instructions on technical investigation and recording of incidents at JSC.

3.37. Emergency response plan.

3.38. Regulations on the division of functions for metrological support of production between workshops and divisions.

3.39. No. 1 - instructions "On the actions of employees in the event of detection of a suspicious object or traces of intrusion."

3.40. No. 2 - instructions "On the actions of employees in the event of receiving a telephone message containing a threat of a terrorist attack during working hours."

Persons who have reached the age of 18, have no medical contraindications, have a document on education, qualifications or special knowledge in this profession, have undergone instruction, theoretical and practical training, internship and have passed the exam for admission to independent work are allowed to work as a driver of pumping units. work.

4. RIGHTS

The operator of pumping units has the right:

4.1. stop work in emergency cases, if further continuation of work creates a danger to others or threatens the safety of the equipment;

4.2. require the provision of special clothing, personal protective equipment, and serviceable tools in accordance with Standard Industry Standards and established wearing periods;

4.3. take measures to prevent loss of working time, energy and water consumption;

4.4. Demand that the shift supervisor eliminate any observed faults.

5. RESPONSIBILITIES

The operator of pumping units is obliged to:

5.1. know and comply with the requirements of the instructions listed in section 3 of these instructions;

5.2. comply with the internal regulations of the joint-stock company, observe labor and production discipline;

5.3. check before starting shift technological equipment, pipeline fittings, electrical equipment, process pipelines, ventilation systems with recording of inspection results in the log of reception and delivery of shifts (work log);

5.4..know the dangers and harmfulness of the substances used when performing work in the workplace;

5.5. know the design of centrifugal and vacuum pumps, basic information on electrical engineering, hydraulics, mechanics, the design and location of instrumentation and automation, rules for starting and stopping pumping units, methods for troubleshooting equipment and eliminating accidents;

5.6. observe the established mode of conducting the technological process in accordance with the technological instructions;

5.7. train newly hired drivers assigned to him in the process of work in safe techniques and work methods;

5.8. monitor the wearing of issued special clothing and safety footwear by subordinate drivers, and their use of the required protective equipment;

5.9. do not allow unauthorized persons into the pumping room;

5.10. comply with the requirements of instructions and rules on labor protection, fire and gas safety, industrial sanitation in the workplace and when performing one-time work;

5.11. attend production and technical courses at least once every three years followed by passing exams;

5.12. it is mandatory to undergo a medical examination and fluorographic examination;

5.13. report to the shift supervisor:

About identified malfunctions of pumping equipment, electrical devices, protective fences, instrumentation and automation, about violations of the technological regime;

On cases of detection of inoperability of signaling and other protective emergency devices;

About each case of injury, poisoning, fire or other incident at or near the work site;

5.14. Know the emergency numbers:

Ambulance - 103;

Gas rescue service - 104;

Fire station - 101;

Dispatcher - __________.

6. RESPONSIBILITY

6.1. The operator of pumping units is responsible for the quality and timeliness of fulfillment of the duties assigned to him by this job description in accordance with current legislation.