Voltage stabilizer for TV: how to choose, what is it for? Voltage stabilizer for a TV - where to buy cheaper Do I need a voltage stabilizer for a led TV
Here in the morning you read such tips and for the whole day you have fun. Well, first of all, what kind of stabilizers in modern TVs are you talking about Filogen13? In modern TVs, as well as in most other household appliances, the power supply is pulsed, which is capable of operating in a wide voltage range and at the same time has a stable voltage value. Look at the nameplate of the power supply and you will see that it says AC 180-250, well, maybe + -. And a good computer PSU will work even at 150V in the network. The same applies to other household appliances and televisions as well. And about plugs and sockets, this is finally ridiculous.
Tell me plizz, what for a TV set without interruption? Is it to have time to watch Santa Barbara if the light is cut off? Those uninterruptible power supplies that have double conversion and have an inverter that works all the time, and not just when the electricity disappears, are clearly not affordable for most. Basically, household uninterruptible power supplies have an RF interference filter in their circuit and feed the equipment from the same network only through the filter. They switch only at the moment of power failure or its large drawdown. Another thing is the voltage regulator, which controls the voltage constantly and has a stable output voltage. For the most part, they are made according to an auto-transformer circuit that has many gadflies and they are switched by triacs when the input voltage changes.
"Therefore, other devices are sold to protect against short circuits and power surges" Please tell me how a short circuit in the network can affect household appliances? Technique does not care at all that a short circuit has occurred, unless of course this short circuit has not occurred on another phase, in this case a phase imbalance is formed and the voltage on some phase will increase, on some it will decrease, depending on the magnitude of the load on one or another phase.
Everything that you were told in stores is just to sell you something. There are very few people out of sales consultants who really understand anything about this, but even if they understand, they will tell you what they need to say in order to sell anything. To me, as a person who is directly involved in electronics, impulse technology, repair of consumer and industrial electronics, it is ridiculous to listen to the nonsense that sales consultants carry to potential buyers.
Light1607, pixels do not burn, the electronic key that ignites it can burn. It can either burn out, then the pixel will turn out to be "dead", or the key can remain open (it can break through), then the pixel will be "hung" (it will constantly glow). The standard allows a certain number of non-working pixels (depending on the panel manufacturer).
If something is gentle to you, it is a voltage stabilizer, if there is no voltage stability. If this is not observed, then do not even worry about this, you can buy a household filter, but only so that the HF component does not pearl into the network.
Voltage stabilizer 220V 500 Energy ASN
2,100 RUB Buy online
RUB 2,171 Buy online
Voltage stabilizer 220V 1000 Energy Lux
2,300 RUB Buy online
Voltage stabilizer 220V 1000 Energy ASN
2,400 rub. Buy online
Voltage stabilizer 220V 500 Energy Voltron (HP)
2,800 RUB Buy online
Voltage stabilizer 220V 1000 Energy Voltron (HP)
3,300 RUB Buy online
Voltage stabilizer 220V 500 Energy Hybrid (U)
3,400 rub. Buy online
Voltage stabilizer 220V 500 Energy ARS
3,800 RUB Buy online
Voltage stabilizer 220V 1000 Energy Hybrid (U)
4,600 rub. Buy online
Voltage stabilizer 220V 1000 Energy ARS
4,600 rub. Buy online
RUB 4,956 Buy online
RUB 12,949 Buy onlineWhen the mains voltage in the house or in the country begins to negatively affect the operation of household appliances, to say that do you need voltage stabilizer for lcd tv? It's not even worth it, you need to buy it right away. All modern appliances that are used in everyday life, as a rule, have high power requirements. Deviations in the parameters in the network, in the form of voltage surges and drops, can lead to disastrous consequences for the appliance, as a result of which it can simply burn out.
Let's say you use a Samsung UE40KU6000K LCD TV with a diagonal of 40 ″ (102 cm) at a price of 31,500 rubles. In this case, of course, it would be more correct to put an inexpensive stabilizer for lcd tv, for example, the cost of which is 2600 rubles. Which will cost you many times cheaper than buying a new household appliance.
What is the best voltage stabilizer for lcd tv
As we have already said, choosing a stabilizer depends on the cost of a household device. And most often these are network regulators and the principle of operation. Of course, if your task is to protect only one specific electrical appliance. If, in addition to the TV, you also need to connect a refrigerator, a washing machine, a computer, then you can consider a model of an electronic stabilizer, such as.
Unlike, at a price a little cheaper, but they have a higher output voltage error. The former have from 6 to 10%, the latter have 3%. But regulators with step adjustment are able to work in rooms with low temperatures, up to -30 degrees. Thus, if you want to go to the country, then the best option would be exactly relay voltage regulator.
What power do you need a voltage stabilizer for an LCD TV
To protect LCD TV brand LG, Samsung, Panasonic, Philips, Sharp, Toshiba, diagonal: 14″ (37cm.), 20″ (51cm.), 21″ (54cm.), 25″ (63cm.), 29″ (72cm.), 32″ (81cm.), 34″ (87cm.), 36″ (92cm.), a 220V voltage regulator for 500 and 1000 watts is enough. Such a device is equipped with a socket, has a fairly compact appearance. That will allow you to install the device near the supplying household equipment.
Also, if you need a more powerful model, a bargain would be stabilizer with built-in surge protector, its price is 2500 rubles.
The company store "stabilizatory-ru" offers at an inexpensive price, with delivery in Moscow, St. Petersburg and other cities of Russia. From a Russian manufacturer ETK "Energy".
The efficiency of the stabilizer depends on the efficiency value - the higher it is, the better. For different models, the parameter is in the range from 80 to 90%. The highest efficiency is inherent in electromechanical models and reaches 97%. With low power consumption, they are able to support the work of consumers with a high total power.
Dimensions and installation type
Most stabilizers are designed for floor installation, as massive models have dimensions of more than 1 m in length and width. Small home appliances can be wall mounted. They have a thin body, the thickness of which, as a rule, is no more than 8 - 10 cm.
Design features
When buying a stabilizer, you should pay attention to the class of protection against water. If there is no risk of moisture ingress, you can purchase a model in an unsealed case (IP20). When there is a possibility of water ingress, stabilizers are chosen in a moisture-proof design (from IP21 to IP24). If the device is supposed to be used outdoors or in an unheated room, a stabilizer in a climatic version is chosen - its case can withstand sub-zero temperatures. Models for installation in heated rooms are designed to operate only at positive temperatures.
If the stabilizer is to be used for a long time, it needs a cooling system. The most effective is forced ventilation of the case. With it, such a device will not turn off due to overheating. Many models have passive cooling - this is justified when the equipment is designed for short-term work cycles.
Control and protection systems
The stabilizer controls the input and output voltage, its values are displayed on the panel, where there is a mechanical or electronic voltmeter.
The automatic shutdown system is activated when there is a threat of overload, overheating or short circuit. It prevents damage to the stabilizer and devices connected to it.
The panel also provides two light indicators - on and error alerts. Models with an embedded microprocessor provide constant monitoring of the operating parameters of the device, the network and the connected load.
Reference article based on the expert opinion of the author.
It's no secret that the voltage of the household electrical network in the summer cottages of the Moscow region leaves much to be desired. It often "jumps" from 90 to 380V. This situation is caused by the aging of the infrastructure - network wires are lashed from gusts of wind, falling branches ... The networks of old summer cottages were not designed for the load from modern appliances, with which country houses are increasingly being filled. Deep-well pumps, electric welders, air conditioners, when turned on, can cause a voltage drop in a worn out and loaded network up to 90V. Malfunctions in transformer equipment give up to 380V to the network. All this causes the failure of household appliances. To reduce the negative impact, voltage stabilizers are used.
A stabilizer is a device that provides a constant amplitude voltage at the load, regardless of the input level. Most modern stabilizers work with an input voltage of 90 to 320V, giving out 190-240V at the output. This variation is acceptable for most TVs and other electronic devices.
Why do you need
Voltage dips cause electronic devices to shut down. Jumps above the allowable values cause the operation of the protection elements.
You can plug in and watch TV without a stabilizer, but if the power level drops or jumps above 230-240V, unpleasant consequences are possible.
In older models of televisions with kinescopes (cathode ray tubes), it was possible to replace the fuse yourself.
Switching power supplies are installed in modern television signal receivers, which are well protected from power surges. In addition, they have a self-healing protection circuit. When the voltage returns to the allowable range, performance will be restored.
Most of the TVs "sent" to the country do not belong to the modern model range. The fuses in them are soldered into the electronic board and repairs are difficult for an "ordinary" person. To fix the problem, you will have to take the TV to a service workshop or call the master at home. All this comes with financial costs.
Types and their features
Currently, stabilizers are produced with different principles of action. They differ in characteristics, design and cost.
Relay
Relay models, they are often called step models, are based on switching the windings of a working transformer. When the input voltage changes, electromagnetic relays close, which switch the necessary contacts. When switching, the quality of the sinusoidal voltage decreases - the adjustment occurs abruptly, the voltage sinusoid changes its form. With an unstable power supply, switching occurs frequently, so the most common malfunction of this type of device is the sticking of the relay. The operation of the device is accompanied by a sound when the relay contacts are closed.
The disadvantages are offset by the low cost of the product.
Electronic
The design uses switching of autotransformer windings using thyristor or triac switches. The operation is silent, but the price of devices is higher than that of relay models. The speed provides instantaneous adjustment of the output parameters.
Electromechanical
Servo motor or servo stabilizers regulate the voltage by moving the carbon contacts along the transformer windings with the help of an electric drive. Among the advantages of the design are low cost, smooth adjustment, small dimensions. The disadvantages include noise during operation, low speed.
ferroresonant
This type of device has been known for a long time. A large mass, noise and the inability to work in overload mode are the main disadvantages of devices of this type. Benefits include long life, low repair costs and fine adjustment of output parameters.
inverter
The inverter type stabilizer performs double conversion. First, the input voltage is converted to DC, then to a stabilized AC. The stability of the output voltage, noiseless operation, reliable protection against external interference and power surges are the advantages of this type of device. The disadvantage is that inverter stabilizers are the most expensive of the types presented.
What to look out for
The ideal option would be to buy a stabilizer capable of providing high-quality electricity to all appliances in a country house. But models above 2-3 kW are expensive. If only a TV is used from the devices of complex household appliances outside the city, then you can limit yourself to buying a low-power model.
In addition to the amount that is planned to be allocated for the purchase, the main parameter is the maximum output power of the device.
Black and white CRT televisions consume 100-150 watts, and color models around 250-300 watts.
For TVs of the second - third generation, 100-200 watts is enough. Modern LCD devices consume up to 70 W in operating mode and up to 50 in standby mode.
The power consumption is indicated in the product passport, or in the marking applied to the case. It is important to choose a stabilizer with a margin of 25-30% in order to exclude its operation in overload mode.
The second important characteristic is the input voltage range at which the device is able to maintain high-quality output parameters.
Options that provide reliability and additional protection of the stabilizer:
- automatic shutdown in emergency mode;
- indication of operating modes;
- indication of the level of input and output voltage;
- the presence of a protection circuit against high-frequency interference.
The correct choice and use of a stabilizer in conditions of poor-quality power supply is an important condition for maintaining the TV's performance.
Power surges and high load can cause breakage of absolutely any equipment. We suggest considering what it is for, and how to choose a stabilizer for a TV, how to make it yourself and connect it to LCD, led and LCD TVs and models with kinescopes.
The principle of operation of the device
Electromechanical stabilizers or voltage regulators for TVs work on the same principle as other similar devices, i.e. designed to control the level of incoming electric current.
A voltage regulator is a device that has a constant output voltage, even if it varies greatly or fluctuates at the input. It performs its function by comparing the output voltage to a fixed (adjustable) level, and minimizing this difference with negative feedback.
The wire of the device is connected to the circuit in a spiral manner, due to which an electromagnet is formed. As the voltage in the circuit increases, the strength of the electromagnet increases. This causes the iron core to start moving towards the electromagnet which is connected to the power switch. When the moving magnet pulls the switch, the voltage in the circuit decreases.
The iron core passes backwards from the electromagnet with some force, acceleration. When the voltage in the circuit decreases, the electromagnet becomes weaker. This allows the core to return to its original position, after which the voltage in the network increases.
How to choose a stabilizer
Of great importance is the power of the mains voltage stabilizer for a TV or computer. It must be remembered that in most of our electrical networks, voltage from 190 V to 240 V is considered normal. Such jumps significantly reduce the life of any devices, respectively, when purchasing a stabilizer, you need to take into account its bandwidth.
Voltage stabilizers test results In addition, it is very desirable that a single-phase electronic stabilizer, you need to consider the following factors:
- possibility of protection against short circuits;
- the device must be small;
- It is desirable to have a silent uninterruptible power supply.
In addition, these network devices can control all small household devices, say, one voltage regulator is installed on an Internet modem, a computer and a TV.
How to choose the power and the required number of watts so as not to overpay and at the same time get efficient work? Stabilizers are marked with numbers that equal a certain kVA level. It will not be difficult to calculate this, 1 kVA - 0.8 kW. Accordingly, knowing how much a certain group of electrical appliances consumes will not be difficult, just divide the amount of power by kW - and get the required level of stabilizer.
Also consider the error, on average, a value of 1 kVA more is allowed.
Which one to buy?
Often, home craftsmen are tormented by the question of which AC stabilizers for a TV are better - Chinese or domestic, we offer a short review. Most often, the service life becomes a stumbling block, there is an opinion that Chinese relay devices do not work much as efficiently as “ours”. This is not always justified. For example, world-famous companies such as pioneer, initia, defender produce quite powerful equipment and at the same time at an affordable price.
Video: How to choose the right voltage stabilizer for your TV
If we talk about other manufacturers, then excellent reviews about the Samsung, Panasonic and Philips stabilizer, they are quite effective for a TV, but the cost is slightly higher than that of the companies listed above. Many series of devices come with a display to control the operation.
If you are interested in budget offers, then look through the catalog avr, Ippon, kromax, neo, ortea, pilot, hero, leader and others. Soviet devices are still quite popular, but now they can only be purchased at flea markets and spontaneous markets.
You can buy these devices in any electrical goods store in Tver, Ufa, Kharkov, Smolensk, Rostov-on-Don, Penza, Omsk, Orenburg, Yekaterinburg, Zelenograd, Irkutsk, Kiev, Almaty and Volgograd.
Exploitation
There are certain rules on how to use an uninterruptible power supply for a TV.
- Do not leave the device on all the time, overheating may occur from this, and the circuit simply will not withstand;
- Any circuit breaker needs to be checked periodically, this is done through load and throughput tests;
- Even the best stabilizer cannot be kept in close proximity to household appliances, because. these electronic devices generate their own magnetic field, which can adversely affect the operation of home appliances.
How to make your own stabilizer
Of course, you can buy a voltage stabilizer for a TV at any electrical store, but their prices may not please you at all. We propose to consider how to make a relay stabilizer cheaply at home.
Voltage stabilizer circuit Below is a schematic diagram of the device, which includes: a transformer, a relay, a capacitor, a microcontroller and other parts (diodes, conductors, transistors, etc.).
During assembly, we used a 200 watt transformer, we reduced its idle speed by connecting the windings to 200 volts. This is a good hinged stabilizer, but it is quite voluminous. In addition, this option is not suitable for a modern plasma TV. A device with a program written specifically for it will be much more useful.
Voltage stabilizer: inside view As a basis, you can take any circuit of a normalizing device, for example, an automobile stabilizer. After that, we interrogate it and connect it to our household appliances. This is a very interesting option, you can even configure it yourself so that the results of checking the voltage level in the network are displayed on the display. Such a passive regulator will be an excellent protective device for a flat-panel TV or a not very powerful home theater.
The development of a modern stabilizer with your own hands takes little time if you have experience in writing programs for electronic devices.
