What are the official rights and obligations of the controller otk. Job description of the controller of quality control in production Download job description of the controller of quality control

QCD or technical control department allows you to separate defective products manufactured at the enterprise from those that meet the standard, which ensures the quality of the products. And that's not it. The job description of a QCD controller includes a number of responsibilities that make the profession more than just important in an organization.

History of the profession

It all started with the release of bullets, which was produced at an arms factory. During the production process, the term "through gauge" was introduced, and this was done by engineer Henry Leland. It was on his initiative that they began to exercise control over the quality of bullets produced. The defective ones were sent to the scrap - this improved the reputation and prevented injuries to the shooters.

Controller at the enterprise

What is a job description

At the moment, an employee of any enterprise has a job description in relation to himself, which must be observed unconditionally. Otherwise, you can make a mistake and provoke a shutdown of the entire enterprise due to certain reasons.

Note! Under the job description understand a document with a list of rights and obligations of each employee of the enterprise.

As for the employee of the technical control department, he holds the position of controller and, in accordance with the job description, checks the quality of products of any nature. For example, low-quality reinforced concrete products are selected at the reinforced concrete plant, which are not subject to final release. And at metalworking plants they find out which metal structure was created with a discrepancy with the specified characteristics.

About document preparation

In accordance with Federal Law No. 79 of July 2004, the creation of a job description is mandatory only for civil servants. The remaining legal entities or individual entrepreneurs independently resolve issues related to the preparation of the document. Rostrud even registered letter No. 3042-6-0 dated August 2007, which states that in the absence of a work instruction at an enterprise, it is prohibited to bring the general director to administrative responsibility.

But such a guide to the action of controllers is still present at enterprises and is compiled as follows:

Only the heads of the enterprise with the appropriate education make up a list of rights and obligations.
The duties of the quality control department in production are assigned only to the senior controller who has a higher education - this requirement is presented in article 195 of the Labor Code of the Russian Federation.
The document must contain information that is displayed in article 57 of the Labor Code of the Russian Federation.
The document must contain factors that are formed into groups - the functions of the employee, duties and responsibilities.

Note! The beginning of the document begins with a specification of the requirements for the controller. Thus, in accordance with the type of enterprise, he must have an appropriate technical education, as well as meet the requirements for qualifications and work experience.

Controller Requirements

First of all, the requirements are indicated in the job description of the QCD controller at the production site. Here they distinguish the presence of a specialty, the correspondence of this specialty to the nature of the enterprise, professional experience (at least 1 year) and other data.

Duties of the Controller

Official and general responsibilities

In the job description, duties are presented as rights. On this issue, the following factors are distinguished:

quality control for the released product;
Appropriate return of rejected products to remanufacturing facilities;
checking the correctness of determining the types of technological processing;
checking the quality of product processing in accordance with technical requirements;
selection of marriage and establishment of reasons;
paperwork;
filling out a report on checked and rejected parts.

The work of the controller in the laboratory

Among the general duties are the observance of internal regulations, the implementation of orders by employees, the timely acceptance of rejected products and the possible elimination of the defect.

The controller also has responsibilities, presented as follows:

quality performance of their duties;
failure to fulfill their functional duties;
formation of unreliable information in reports;
failure to take measures to prevent marriage or alteration of the product - if the reason is a breakdown of the equipment, it is necessary to notify the management in time;
non-observance of labor discipline.

Important! The controller is also obliged to monitor the observance of labor protection rules by employees. In the event of a malicious violation, take action on their own or notify management.

Relationships with other departments

The controller must interact with the central laboratory of measuring equipment, with workshops and sections, with the quality engineer of the technical control department. In the first case, the interaction consists in filing an application for high-frequency and arbitration measurements and tests. Here, even electronic equipment can be included in the case, which will help to identify an error in the released item.

Cooperation with sites occurs during the production of a product, which is manufactured in several stages that take place in certain workshops. Control with the engineer is more related to the submission of data on rejected products and the indication of reasons.

Note! The report sometimes identifies specific individuals who were responsible for what happened. Together with the engineer, measures are taken to eliminate the problem.

What should the job description of the controller contain: sample documents

It is necessary to separately consider documents in relation to various areas of production. This will help to accurately determine your rights and obligations if you have been appointed to the position of controller.

Product processing quality

In this case, there is no single sample document, since the nature of the enterprise is taken into account here. It also defines job responsibilities. For example, in terms of mechanical engineering, it is important to pay attention to the quality of components - bearings, flywheels, carriages, rollers, gears, and so on.

In the turning industry

Turning production requires the controller to pay attention not only to the quality of finished products, but also to the materials used in the work. The task of the controller in case of detection of metal that does not meet quality standards is to replace it with a high-quality or other type of raw material, if the management of the enterprise allows it.

In film production

The QCD inspector must additionally check the packaging of the finished product, since the PVC film tends to tear under mechanical stress. The presented oversight can lead to huge losses of finished products.

Collection of materials for research

In the sewing industry

The task of the garment production inspector is to identify defective products, as well as to replace the materials used for their tailoring in case of non-compliance with the quality standard. Moreover, the job descriptions prescribe the implementation of control over the observance of safety regulations for each employee.

Quality controller salary

The average salary of a controller is 30-35 thousand rubles. If we are talking about a dangerous enterprise, the payment can be increased to 60-70 thousand rubles, which is determined by the large number of job responsibilities of the employee.*

The QCD controller is an important figure in the enterprise, who works in accordance with the job description and the current legislation of the Russian Federation. In case of detection of violations on the part of employees, he will be held responsible, therefore, his vigilance should not be reduced under any circumstances.

*Prices are valid for August 2019

sample paperwork

V.V. Umnikov

senior control foreman of the technical control department

1. General Provisions

1.1 The senior control foreman of the technical control department of JSC "Company" reports directly to the head of the technical control department of JSC "Company" or the head of the technical control bureau, if this position is provided.

1.2 The senior control foreman is appointed and dismissed by the order of the General Director of JSC "Company" on the proposal of the Deputy General Director for Quality and Metrology or the Head of Quality Control Department.

1.3 A person with a higher professional (technical) education and at least 1 year of work experience in production or a secondary technical education and at least 3 years of work experience in a specialty in the industry corresponding to the profile of an enterprise is appointed as a senior control master of the QCD.

1.4 The following are subordinate to the senior control master:

- testers of subordinate units:

1.5 The senior control foreman in his activities is guided by:

- Decrees of state bodies of the Russian Federation;

— Law of the Russian Federation “On technical regulation”;

- Law of the Russian Federation "On Standardization" No. 5154-1 dated 10.06.93;

- Law of the Russian Federation "On certification of products and services" No. 5151-1 dated 10.06.93;

- Law of the Russian Federation "On ensuring the uniformity of measurements" No. 4871-1 dated April 27, 1993;

— The policy of the enterprise in the field of quality;

— documentation of the quality management system of the enterprise;

— methodological, normative and technical documents and international standards;

— Regulations on QCD;

- this job description.

1.6 In the event of a temporary absence, the duties of the senior control foreman are performed by a specialist appointed by order of the general director on the proposal of the head of the Quality Control Department.

2 Job responsibilities

The senior control master is obliged to:

2.1 Organize work on the assigned site to control and improve the quality of products, the completeness of manufactured products and the accounting of non-conforming products.

2.2 Control the correctness of establishing the type and type of products, their compliance with approved samples (standards), standards, specifications and other regulatory and technical documentation.

2.3 Monitor compliance with technological processes at all stages of production, instructions and procedures for technical control at the workplace, the quality of containers and packaging, the technical condition of equipment, storage of raw materials, materials and semi-finished products, components, finished products.

2.4 Manage the work on the preparation of technical documentation certifying the quality and completeness of manufactured or supplied products (passports, certificates), product certification.

2.5 Monitor compliance with the schedules for checking the accuracy of production equipment and tooling, the state of control and measuring equipment, their availability at the workplace, and timely submission for state inspection.

2.6 Take measures to prevent the production of products that do not meet the established requirements, identify the causes and perpetrators of non-conformities, as well as develop and implement measures aimed at improving the quality and competitiveness of products.

2.7 Participate in the development and implementation of the most advanced product quality management systems, control methods, new and revised existing standards, specifications and other regulations and instructions.

2.8 To exercise control over the observance by subordinates of the rules of labor protection, safety measures, industrial and labor discipline, internal labor regulations. Conduct periodic briefings on the rules of labor protection and safety.

2.9 Monitor the delivery of finished products to the warehouse.

2.10 Make proposals to the head of the QCD on encouraging employees, as well as bringing to disciplinary responsibility violators of production and labor discipline.

2.11 To promote the improvement of qualifications and professional skills of workers, their training and assignment of categories, to carry out educational work in a team.

2.12 Participate in production meetings held by the heads of the production departments of the enterprise.

2.13 Participate in the preparation and holding of the "Quality Day" in the shop.

2.14 Timely and accurately execute the production orders of the General Director of the enterprise, production assignments, instructions and instructions of the Deputy General Director for Quality and Metrology, the Head of Quality Control Department.

2.15 To fulfill the labor duties stipulated by this job description and the employment contract.

2.16 Comply with the internal labor regulations established at the enterprise.

2.17 Do not engage in activities that directly or indirectly damage the interests of the enterprise.

2.18 Know the relevant QMS documentation required for work and comply with its requirements.

2.19 Continuously improve the results of its activities.

3 Professional requirements

The senior control master must know:

— legislative and regulatory legal acts, methodological materials on product quality management;

— technological processes and modes of production;

— basic technological and design data of manufactured products;

- technical and economic requirements for raw materials, materials, semi-finished products, components and finished products;

— current standards in the industry and at the enterprise, technical conditions, standards for quality indicators, technological instructions;

— systems, means and methods of technical control of production;

- rules for the acceptance and storage of finished products, raw materials, materials, semi-finished products, components;

- methods of sampling, the procedure for labeling and packaging products;

— the procedure for certification of the quality of industrial products;

- types of production non-conformities, methods for their prevention and elimination;

— rules for testing and acceptance of products;

– the procedure for issuing technical documentation certifying the quality of products;

— fundamentals of economics, organization of production, labor and management;

— basics of labor legislation;

— rules and norms of labor protection;

— relevant QMS documentation.

The senior control master has the right:

4.1 Request and receive information necessary for him to perform his duties from employees of any departments.

4.2 Make a decision on disagreements between the QCD employees and employees of the production departments of the enterprise in their assessment of the conformity of products to the requirements established for it.

4.3 Submit proposals to the Deputy General Director for Quality and Metrology - Head of the Quality Control Department on bringing to responsibility officials and workers of the enterprise guilty of manufacturing products that do not meet the established requirements.

4.10 Represent the QCD in various commissions of the enterprise on issues within its competence.

5 Service relationships

The senior control master of the technical control department interacts:

5.1 With the central laboratory for measuring technology:

– provides: applications for high-precision and arbitration measurements and tests. Measuring instruments for verification, according to the schedule, out of order before the next verification. Measuring instruments for rechecking or repair;

- receives: graphs for checking measuring instruments. Information about the withdrawal from circulation of faulty measuring devices that did not pass inspection within the established time limits.

5.2 With workshops and sites:

- provides: a conclusion on the conformity of products to the requirements of those. documentation (TU, GOSTs, drawings, standards, manufacturing technology);

- receives: accompanying technical documentation (drawings, diagrams, standards and manufacturing technology for products).

5.3 With the quality engineer of the technical control department:

- provides: with information about the presented products and detected non-conformities. Acts of non-compliance indicating those responsible for the manufacture of non-conforming products. Information about the culture of production;

- Receives: Product return information for each day. Information on the results of accounting for losses from non-conforming products in the shops according to acts of non-compliance and on the allocation of amounts to those responsible.

The senior control master is responsible in the manner prescribed by the laws of the Russian Federation for:

- failure to fulfill the duties assigned to him, provided for by this job description and the employment contract (contract);

- Misjudgment of product quality.

Head of Quality Control Department K.K. Right

Head of Personnel Department I.I. Ivanov

Head of the Legal Department S.S. Sergeev

Lead QMS engineer V.V. Vasiliev

Copying of materials is allowed only with an active link to the source

Job description of the Quality Controller of products and technological process of the 4th category

(instructions of these employees are carried out only if they do not contradict the instructions of the immediate supervisor).

Substitution:

The quality controller of products and the technological process of the 4th category replaces.
Replaces the quality controller of products and the technological process of the 4th category.

Recruitment and dismissal:

The quality controller of products and the technological process is appointed to the position and dismissed by the head of the department in agreement with the head of the department. 2. Qualification requirements:

product range
process parameters
device, principle of operation of equipment and instrumentation in the serviced area
sampling rules and analysis methods
the impact of equipment condition on the quality of products
GOSTs and specifications for raw materials and finished products.

3. Job responsibilities:

Control over the course of the technological process in the serviced area based on the results of analyzes and indications of instrumentation.
Control of observance by apparatchiks of technological regulations according to the instruction card.
Assessment of the technical condition of operating equipment.
Control over timely and correct sampling.
Participation in the acceptance of equipment after technological stops, cleanings and repairs.

p. 1 Job description Product and process quality inspector

p. 2 Job description Product and process quality inspector

This job description was developed in accordance with (name, number and date of the document)

(signature) surname, initials

Head of the legal department:

Job description of the QCD controller (technical control department) - a document that fixes the rights and obligations of this employee, as well as the requirements for his qualifications. Let's figure out what such an instruction contains.

The structure of the instructions for the controller of the quality control department in production

QCD is a department that controls the quality of manufactured products at the enterprise. The tasks of its employees include screening out defects, reconciliation of finished products or parts with drawings, requirements of GOSTs or other standards, finding out the reasons for low quality and suggesting necessary measures. The controller (or controllers) of the OTC is engaged in all this.

As with other employees, in order to consolidate the main points related to work in this position (rights, duties, etc.), an appropriate job description can be introduced at the enterprise. There is no single standard for its development, although in practice a certain template has already been developed, according to which the instruction usually includes 4 parts:

Qualification requirements, job responsibilities, rights and responsibilities of the QCD controller

Now let's take a quick look at the content of each section of the job description.

The first, relating to general provisions, contains the following information:

general characteristics of the position;
the procedure for appointing and dismissing the controller;
requirements for the qualification and length of service of the employee;
regulatory and methodological acts that the controller should know.

The second section is a list job responsibilities of the QCD controller. In particular, it states that he must:

check the quality of products;
keep a marriage register;
participate in the consideration of claims and reclamations for the delivered goods.

The section on rights describes the additional rights granted to the controller. For example, it may be said there that he has the right to report to the management about the situation, give instructions to subordinates, etc.

Job description of the product processing quality controller

We bring to your attention a typical example of a job description for a product processing quality inspector, a sample of 2017. A person with primary or secondary vocational education, special training and work experience can be appointed to this position. Do not forget, each instruction of the product processing quality inspector is issued on hand against receipt.

The hr-portal website provides typical information about the knowledge that a product processing quality controller should have. About duties, rights and responsibilities.

This material is included in the huge library of job descriptions on our website, which is updated daily.

1. General Provisions

1. The product processing quality inspector belongs to the category of workers.

2. A person with secondary vocational education or primary vocational education and special training and work experience of ________ years is accepted for the position of product processing quality inspector.

3. The product processing quality controller is hired and dismissed by the director of the organization on the proposal of the head of production (section, workshop)

4. The product processing quality controller must know:

a) special (professional) knowledge of the position:

Technical requirements for the quality of processing at all stages of the technological process;

Methods of technical quality control of processing;

Requirements for placing orders accepted for processing; the procedure for returning incorrectly accepted or executed orders to the receiving points;

The effect of solvents, chemical materials and dyes on products, accessories and finishing materials;

Assortment and labeling of products;

Type and fibrous composition of materials;

Rules for the acquisition of production batches; operating in production technological instructions, enterprise standards, republican standards and specifications;

Rules for storage and transportation of products;

Types of manufacturing defects, methods of its prevention and elimination;

The procedure for issuing documentation on the quality of services provided and irreparable marriage;

b) general knowledge of the employee of the organization:

Rules and norms of labor protection, safety measures, industrial sanitation and fire protection,

Rules for the use of personal protective equipment;

Requirements for the quality of work (services) performed, for the rational organization of labor in the workplace;

Types of marriage and ways to prevent and eliminate it;

5. In its activities, the product processing quality controller is guided by:

Orders and instructions of the director of the organization,

By this job description,

The internal labor regulations of the organization,

6. The product processing quality controller reports directly to a worker with a higher qualification, the head of production (section, workshop) and the director of the organization.

7. During the absence of the product processing quality inspector (business trip, vacation, illness, etc.), his duties are performed by a person appointed by the director of the organization on the proposal of the head of production (section, workshop) in the prescribed manner, who acquires the appropriate rights, duties and is responsible for performance of the duties assigned to him.

2. Job responsibilities of the product processing quality controller

The duties of the product processing quality controller are:

a) Special (professional) duties:

Quality control of product processing at various stages of the technological process.

Return to the collection points of products accepted without indicating defects or due to incompleteness of orders.

Checking the correctness of determining the types of technological processing, conducting preparatory operations and observing the rules for completing production batches.

View products and determine the quality of processing in accordance with the current technological instructions, enterprise standards, republican standards and specifications.

Selection of products with processing defects and establishing the causes of marriage.

Registration of relevant documentation for rejected products indicating the type and nature of the marriage.

Direction of damaged products for drawing up an act.

Accounting for checked and rejected products.

b) General duties of an employee of the organization:

Compliance with the Internal Labor Regulations and other local regulations of the organization,

Internal rules and norms of labor protection, safety, industrial sanitation and fire protection.

Fulfillment, within the framework of the employment contract, of the orders of the employees to whom it was repaired in accordance with this instruction.

Performing work on the acceptance and delivery of shifts, cleaning and washing, disinfection of serviced equipment and communications, cleaning the workplace, fixtures, tools, as well as keeping them in proper condition;

Maintaining established technical documentation

3. Rights of the product processing quality controller

The product processing quality controller has the right to:

1. Submit proposals for management consideration:

To improve the work related to the duties provided for in this instruction,

On bringing to material and disciplinary liability workers who violated production and labor discipline.

2. Request from structural divisions and employees of the organization the information necessary for him to perform his duties.

3. Get acquainted with the documents that define his rights and obligations in his position, the criteria for assessing the quality of performance of official duties.

4. Get acquainted with the draft decisions of the organization's management regarding its activities.

5. Require the management of the organization to provide assistance, including the provision of organizational and technical conditions and execution of the established documents necessary for the performance of official duties.

6. Other rights established by the current labor legislation.

4. Responsibility of the product processing quality controller

The product processing quality inspector is responsible in the following cases:

1. For improper performance or non-performance of their official duties provided for by this job description - within the limits established by the labor legislation of the Russian Federation.

2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.

In order to properly prepare the job description of the QCD controller in production, you need to be guided by a number of regulatory legal acts. Learn more and download a sample.

Read our article:

How to prepare a job description for a QCD controller in production

The preparation of a job description (hereinafter DI) is mandatory only for civil servants. This is a requirement of Art. 47 . For commercial organizations - legal entities and individual entrepreneurs - the employer independently decides whether this document needs to be developed.

Job descriptions are developed by line managers. The personnel management service should provide them with methodological support in this.

If the employee's position is related to the provision of an early insurance pension, or with any restrictions, the title of the position must be brought in line with the professional standard.

In the professional standard, the position is indicated as "Specialist in technical control of product quality." Since the OTK controller is not included in the preferential lists No. 1 and No. 2, the employer may not change the title of the position. But the requirement for a higher education is mandatory, this is indicated in.

The DI indicates the mandatory information listed in . This includes the name of the position and structural unit, the labor function of the employee, the list of duties, responsibility, qualification requirements, and work experience.

The structure of the job description

The document must include mandatory sections. The general provisions must spell out the correct title of the position - as indicated in the staffing table. It should also list the regulatory legal acts that must be observed by the employee. Then the eligibility requirements are given.

The QCD controller is a specialist, not an employee of working professions. In order to draw up a DI, it is necessary to be guided by an approved professional standard. This document establishes the requirements for an employee to have a higher education in the volume of a bachelor's degree, and it is also recommended to improve qualifications at least once every five years.

An obligatory element of DI is an explanation of the subordination of the controller and official subordination - in administrative and functional terms. The controller may report to the head of the Quality Control Department for administrative (linear) subordination and be functionally subordinate to the quality laboratory.

With functional subordination, an employee may also be subordinated to related profiles of his job duties. For example, the controller of the quality control department for the production of bread products may be functionally related to the grain laboratory.

It is necessary to reflect in the CI whether, in turn, the QCD controller has subordinate employees, and who belongs to them, as well as to prescribe the replacement procedure in case of temporary absence.

The next section will be the job responsibilities of the employee, as well as liability for failure to comply with this document.

Job Responsibilities of the Inspector of Quality Control at Production

In the "Responsibilities" section, list all the duties assigned to the employee.

To compile a section, you will need to use the professional standard of March 21, 2017 N 292n, as well as. These documents contain an approximate list of duties of the QCD controller.

The main responsibility of the employee is to control incoming materials, raw materials, semi-finished products for compliance with GOST. He is obliged to monitor and use various methods of measurement, control and testing for this.

Download the memo

Only those duties that correspond to codes from A/01.5 to A/04.5 corresponding to the fifth skill level need to be indicated on the ID. Levels 6 and 7 already refer to the leading employees of the OTC service. The controller is an executor, therefore, he is not obliged to ensure the organization of work on product quality control in a department or organization.

Rights

In this section, write down the list of rights that an employee has within his competence at the time when he performs his duties. The QCD controller has an important function in production, he must not allow marriage and deviation from the requirements of technical regulations and GOST. Therefore, his powers are extensive.

For example, an employee has the right to petition for scammers, as well as to issue proposals for improving the quality of materials, raw materials, semi-finished products and components. These proposals may include not only technical measures, but also proposals for the organization of work, up to personnel transfers.

Responsibility of the controller

In the "Responsibility" section, it is customary to specify the types of responsibility assigned, depending on the official duties of the employee.

If the job description is an independent document, approve it by order of the head of the organization and familiarize the employees whom you accept for the corresponding position with it against signature (part 3 of article 68, article 57 of the Labor Code).

Sample job description for a QCD controller

Download>>>
Download in.doc

Find the sample document on labor protection you need in the Reference system "Labor protection". Our experts have already prepared 2506 templates!

1. GENERAL PROVISIONS.
1.1. This job description defines the functional duties, rights and
responsibility of the QCD controller.
1.2. The controller of the QCD is appointed to the position and dismissed from the position in accordance with the procedure established by the current labor legislation by order.
1.3. The controller of the QCD reports directly to the head of the QCD.
1.4. A person with a secondary technical education is appointed to the position of QCD controller.
1.5. The OTC controller must know:
- resolutions, orders, orders, other guidance and regulatory materials on the organization of the work of the quality service;
- the structure of the enterprise and its divisions;
- the procedure and timing of reporting;
— computer and organizational equipment;
— labor legislation;
- internal labor regulations;
— rules and norms of labor protection, fire safety and industrial sanitation.
2. FUNCTIONAL RESPONSIBILITIES.

OTC controller:
2.1. Carries out quality checks of component parts of slot machines, as well as finished products, their registration and registration.
2.2. Carries out the return for revision of slot machines with inconsistencies with the requirements of the standards.
2.3. Makes decisions on problems that have arisen when checking the quality of slot machines.
2.4. Together with the head of the QCD and the quality engineer, he participates in the analysis of the causes of defects and monitors their elimination.
2.5. Participates in the registration and maintenance of accounting, in the preparation of reports.

The QCD controller has the right:
3.1. Control the quality of component parts and materials during incoming inspection, the quality of individual work and finished products.
3.2. Stop acceptance and shipment of finished products that do not meet the requirements of GOST, TU, standards, drawings, set completeness and technical documentation, immediately notifying the quality manager.
3.3. Make proposals to the quality manager and the head of the QCD on the suspension of the manufacturing process of products in individual divisions and workshops if it does not meet standards, specifications, drawings, etc.
3.3. Request and receive the necessary materials and documents related to the activities of the QCD controller.
3.4. Enter, on the instructions of the head of the Quality Control Department, into relationships with departments of third-party institutions and organizations to resolve operational issues of production activities.
4. RESPONSIBILITY.

The QCD controller is responsible for:
4.1. High-quality and timely performance of the duties assigned to him by this job description.

4.2. Failure to fulfill their functional duties.

4.3. Inaccurate information about the status of the work performed by him.

4.4. Failure to comply with orders, orders and instructions of the director of the enterprise, quality manager and head of the Quality Control Department.

4.5. Failure to take measures to suppress the identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the enterprise, its employees.

4.6. Failure to comply with labor and performance discipline.
5. CONDITIONS OF WORK.

5.1. The mode of operation of the QCD controller is determined in accordance with the Internal Labor Regulations established at the enterprise.
5.2. In connection with the production need, the QCD controller may go on business trips (including local ones).
5.3. The QCD controller is given the right to sign documents on issues that are part of his functional duties.

And who can count on a salary increase Mark Bershidsky According to a December study by Hays, next year 46% of employers plan to increase their staff. 45% say that they do not plan to increase the staff, but will only deal with...

Raghav Haran, who has worked at major companies including Shutterstock and TrueVentures, wrote about how you can get the job you want, even if you don't have the diplomas and certifications you need. The editors of vc.ru prepared a translation...

Only every tenth employer is satisfied with the level of training provided by higher education in Russia. Companies need to start training their own personnel, ceasing to rely on the state and universities. You can’t just become a specialist in demand on the market, although...

Opinions of employers: which employees should be disposed of in the first place Representatives of Mail.Ru Group, Aviasales, Sports.ru and other companies explain. Anna Artamonova, Vice President of Mail.Ru Group First of all, you need to get rid of toxic employees....

Amazon recruiting manager Celeste Joy Diaz talked about the biggest mistakes Amazon job seekers make. Top Google recruiters agree. They identified 3 types of resumes and advised which one is better. 1. Resume with positions. In this resume...

Imagine that you found your employee's CV on a recruiting site. What to do? Call "on the carpet" and force to delete the profile? Persuade to stay? Double your salary? Or fire the "traitor" without much thought? We asked business representatives what they...

It is not so easy to find and keep a good IT specialist in the company for a long time. It seems that the salary is not bad, and the office is what you need (in the style of a loft, a coffee machine, cookies, etc.) and career growth is predicted, but candidates do not line up. And what, one asks, still needs this ...

We bring to your attention a typical example of a job description for a product processing quality inspector, a sample of 2019/2020. A person with primary or secondary vocational education, special training and work experience can be appointed to this position. Do not forget, each instruction of the product processing quality inspector is issued on hand against receipt.

It provides typical information about the knowledge that a product processing quality inspector should have. About duties, rights and responsibilities.

This material is included in the huge library of our site, which is updated daily.

1. General Provisions

1. The product processing quality inspector belongs to the category of workers.

3. The product processing quality controller is hired and dismissed by the director of the organization on the proposal of the head of production (section, workshop)

4. The product processing quality controller must know:

a) special (professional) knowledge of the position:

- technical requirements for the quality of processing at all stages of the technological process;

— methods of technical quality control of processing;

- requirements for placing orders accepted for processing; the procedure for returning incorrectly accepted or executed orders to the receiving points;

- the effect of solvents, chemical materials and dyes on products, accessories and finishing materials;

- assortment and labeling of products;

— type and fibrous composition of materials;

- rules for the acquisition of production batches; operating in production technological instructions, enterprise standards, republican standards and specifications;

- rules for storage and transportation of products;

- types of manufacturing defects, methods of its prevention and elimination;

- the procedure for issuing documentation on the quality of services provided and irreparable marriage;

b) general knowledge of the employee of the organization:

— rules and norms of labor protection, safety measures, industrial sanitation and fire protection,

- rules for the use of personal protective equipment;

- requirements for the quality of work (services) performed, for the rational organization of labor in the workplace;

- types of marriage and ways to prevent and eliminate it;

- production signaling.

5. In its activities, the product processing quality controller is guided by:

- the legislation of the Russian Federation,

- the charter of the organization,

- orders and orders of the director of the organization,

- this job description,

— Rules of internal labor regulations of the organization,

— __________________________________________________.

6. The product processing quality controller reports directly to a worker with a higher qualification, the head of production (section, workshop) and the director of the organization.

2. Job responsibilities of the product processing quality controller

The duties of the product processing quality controller are:

a) Special (professional) duties:

— Quality control of product processing at various stages of the technological process.

– Return to the collection points of products accepted without indicating defects or due to incompleteness of orders.

– Checking the correctness of determining the types of technological processing, conducting preparatory operations and observing the rules for completing production batches.

– Review of products and determination of the quality of processing in accordance with the current technological instructions, enterprise standards, republican standards and specifications.

– Selection of products with processing defects and establishing the reasons for the marriage.

– Registration of relevant documentation for rejected products indicating the type and nature of the marriage.

- Sending damaged products for drawing up an act.

- Accounting for checked and rejected products.

b) General duties of an employee of the organization:

— Compliance with the Internal Labor Regulations and other local regulations of the organization,

— internal rules and norms of labor protection, safety measures, industrial sanitation and fire protection.

– Fulfillment, within the framework of the employment contract, of the orders of the employees to whom it was repaired in accordance with this instruction.

– Performing work on the acceptance and delivery of shifts, cleaning and washing, disinfection of serviced equipment and communications, cleaning the workplace, fixtures, tools, as well as keeping them in proper condition;

- Maintenance of established technical documentation

3. Rights of the product processing quality controller

The product processing quality controller has the right to:

1. Submit proposals for management consideration:

- to improve the work related to the duties provided for in this instruction,

— on bringing to material and disciplinary responsibility employees who violated production and labor discipline.

2. Request from structural divisions and employees of the organization the information necessary for him to perform his duties.

3. Get acquainted with the documents that define his rights and obligations in his position, the criteria for assessing the quality of performance of official duties.

4. Get acquainted with the draft decisions of the organization's management regarding its activities.

6. Other rights established by the current labor legislation.

4. Responsibility of the product processing quality controller

The product processing quality inspector is responsible in the following cases:

1. For improper performance or non-performance of their official duties provided for by this job description - within the limits established by the labor legislation of the Russian Federation.

2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.

3. For causing material damage to the organization - within the limits established by the current labor and civil legislation of the Russian Federation.

Job description of the product processing quality controller - sample 2019/2020. Job responsibilities of the product processing quality inspector, rights of the product processing quality inspector, responsibility of the product processing quality inspector.